|
About Hatch Packing
Hatch cover rubber packing is also called hatch seals watertight door seal or gaskets which can be made from assorted rubber materials according to different application. For the time being, Neoprene, EPDM, Natural Rubber, is widely used for the hatch packing production. Hundreds of packing styles have been designed for different steel hatch covers over the years.
Aquaseal Rubber Ltd has been manufacturing rubber hatch cover seals for more than 35 years for leading hatch cover suppliers world-wide. We are able to supply the most common rubber seals on the marked for any application. All sponge rubber types can be delivered with solid sealing skin from Natural rubber, Neoprene, Nitrile or blends of these rubbers to suit the cargo you are moving. We also manufacture solid rubber sealing types, as well as sliding rubber profiles please visit our photo gallery for some of the more common shapes & sizes available.
We produce also special hatch packing for naval ships, oil tanks, chemical tanks which have may have to have characteristics of fire-resistance and anti-corrosion etc. Furthermore we can produce items according to clients' drawings or samples with a fast turn around.
Corner and end pieces
we manufacture a range of molded & fabricated corner and end pieces for most types of rubber seals. Corner and end pieces are critical for tight seals. Our corner and end pieces are to the right type of compression this is done in order to withstand wear and tear.
Marine Solid Rubber Packing
These are designed for steel hatch covers which are popularly used on most of new build.
The solid packing’s have much better advantages from the sponge packing. They can be extruded from designed tooling frequently and steadily. The solid packing’s tend to have longer life span than traditional sponge packing.
Furthermore they can be produced according to any new designs at lower tooling cost. And we can easily produce various nonstandard packing’s according to clients' request in short and long run quantity’s.
|
